Products
Baby Wolf 4 Shaft 10 Treadle Kit - Schacht
$115.00
This kit allows you to install four additional treadles on your Baby Wolf loom, bringing the total number of treadles up to ten. More treadles mean more tie-up options! Delivery...
Baby Wolf High Castle Tray - Schacht
$219.00
The High Castle Tray adds handy storage to your Baby Wolf loom, and provides a convenient place to mount the swivel pin of an extension lamp. Available in different sizes to...
Baby Wolf Raddle - Schacht
$170.00
Raddles are a must-have loom accessory that help keep a warp spread evenly as it is wound onto the warp beam. This raddle is designed specifically for your Baby Wolf...
Baby Wolf Sectional Beam - Schacht
$191.00
Schacht sectional beams are easily assembled and can be installed on the existing warp beam of your Baby Wolf at any time. The Baby Wolf sectional warp beam has two-inch sections and...
BERGERE 24" LeClerc - Rigid Heddle Loom
$305.00
The Bergere is Lecler's version of the rigid heddle loom, and it has many of the qualities that weavers love about Leclerc products: it is solidly constructed from maple wood,...
Bobbin Winder - Hard Maple
$142.00
We absolutely love these bobbin winders; they make short work of winding bobbins while adding a beautiful touch to any weaving studio. Our studio bobbin winder has been around for...
Cranks for Looms - LeClerc
$27.00
Cranks are the most commonly missing part on used Leclerc looms. They are easily removable when not warping, and as a result they have a bad habit of disappearing. Luckily,...
Hand Bobbin Winder - LeClerc
$135.00
A light but strong hand bobbin winder with completely covered gear. Tapered plated shaft for all Leclerc bobbins and Leclerc Spools. Clamps to a tabletop up to 1½" thick. Set...
LeClerc - Bumpers
$6.50
3000-9229 Beater Bumper (set of 2) 3000-9233 Bumper under shaft frame 4s loom, sold as each. 3000-9230 Bumper under shaft frame 8s loom, sold as each.
LeClerc - Double Fringe Twister
$18.00
How to use the Double Fring Twister To twist fringe, decide on the number of strands to be included, and divide them into groups. Clamp one group into each clip,...
LeClerc - Heddle Hooks - All Sizes
$6.20
Reed and Heddle Hook: There are different size heddle hooks available. Curved steel shaft 3/16" (5mm) wire designed with ¼" (4mm) hook angle. 6141-7000: 5" (13 cm) long, made for a...
LeClerc - Lease Stick - All Sizes
$9.50
Lease sticks are sold per stick (if you’d like a pair make sure you order two sticks) Each stick comes with a binder clip attached. Sizes available: 2010-3929: 15” Wood...
LeClerc - Raddle - All Sizes
$32.00
LeClerc Raddles fit in the beater (2 dents per inch) Used to spread the warp when beaming. It has an open top which can be covered with top of beater. We...
LeClerc - Rag Shuttle with Removable Rod
$42.00
Rag Shuttle with removable to hold one or many bobbins. There is a hole in the edge for the thread. This shuttle is really nice for bulky thread and rug making! ...
LeClerc - Stainless Steel Reed 100" (250cm)
$440.00
Stainless Steel Reed 100" (250cm) from LeClerc *Reed shown in the product photo is just an example. Measurements: 3½” inside (9cm) 4¾” (12cm) outside Available Dents: 4-25 Dents / Inch...
LeClerc - Stainless Steel Reed 120" (305cm)
$528.00
Stainless Steel Reed 120" (305cm) from LeClerc *Reed shown in the product photo is just an example. Measurements: 3½” inside (9cm) 4¾” (12cm) outside Available Dents: 4-25 Dents / Inch...
LeClerc - Stainless Steel Reed 15¾" (40cm)
$69.00
Stainless Steel Reed 15¾" (40cm) *Reed shown in the product photo is just an example. Measurements: 3½” inside (9cm) 4¾” (12cm) outside Available Dents: 4-25 Dents / Inch Delivery 2-3...
LeClerc - Stainless Steel Reed 22" (56cm)
$96.00
Stainless Steel Reed 22" (56cm) *Reed shown in the product photo is just an example. Measurements: 3½” inside (9cm) 4¾” (12cm) outside Available Dents: 4-25 Dents / Inch Delivery 2-3...
LeClerc - Stainless Steel Reed 24" (60 cm)
$105.00
Stainless Steel Reed 24" (60 cm) from LeClerc *Reed shown in the product photo is just an example. Measurements: 3½” inside (9cm) 4¾” (12cm) outside Available Dents: 4-25 Dents /...
LeClerc - Stainless Steel Reed 27" (70cm)
$120.00
Stainless Steel Reed 27" (70cm) from LeClerc *Reed shown in the product photo is just an example. Measurements: 3½” inside (9cm) 4¾” (12cm) outside Available Dents: 4-25 Dents / Inch...
LeClerc - Stainless Steel Reed 32'' (82cm)
$141.00
Stainless Steel Reed 32'' (82cm) from LeClerc *Reed shown in the product photo is just an example. Measurements: 3½” inside (9cm) 4¾” (12cm) outside Available Dents: 4-25 Dents / Inch...
LeClerc - Stainless Steel Reed 36" (90cm)
$158.00
Stainless Steel Reed 36" (90cm) from LeClerc *Reed shown in the product photo is just an example. Measurements: 3½” inside (9cm) 4¾” (12cm) outside Available Dents: 4-25 Dents / Inch...
LeClerc - Stainless Steel Reed 45" (115cm)
$198.00
Stainless Steel Reed 45" (115cm) from LeClerc *Reed shown in the product photo is just an example. Measurements: 3½” inside (9cm) 4¾” (12cm) outside Available Dents: 4-25 Dents / Inch...
LeClerc - Stainless Steel Reed 60" (150cm)
$264.00
Stainless Steel Reed 60" (150cm) from LeClerc *Reed shown in the product photo is just an example. Measurements: 3½” inside (9cm) 4¾” (12cm) outside Available Dents: 4-25 Dents / Inch...