Loom Parts & Accessories
Schacht Bobbins for Weaving
$30.00
Our plastic bobbins come in three sizes, in packages of 10. They have specially designed ends for trouble-free release of yarn. 4″ bobbins fit our 9″ mini, 11″, and both...
Reeds for Rigid Heddle Looms - Cricket & Flip from Schacht
$56.00
With dents ranging from 5, 8, 10, and 12, you can weave with a wide variety of yarns. Available for all Schacht Cricket and Flip Folding Looms. For help choosing...
Texsolv Loop Cord and Pegs
$1.75
6191-3000 Small LOOP cord per meter (1.10 yards) 6191-2000 Large LOOP cord per meter (1.10 yards) 6191-2211 Loop Cord Anchor Peg
Texsolv Heddles
$24.00
System Texsolv is a well-tested solution and is used all over the world. many of the world's loom manufacturer has Texsolv System as standard parts in their looms. Here are...
LeClerc Heddles
$13.00
Heddles are special order and take 3-4 Weeks to Ship. Heddles are non-refundable. Please double-check what size your loom needs before ordering. Leclerc always believes that light wood frame, heddle supports, and...
LeClerc Warping Boards
$125.00
These warping boards are sturdily constructed and can be taken apart for easy storage. They can be used flat on a table, or hung on a wall. We have three...
LeClerc - Raddle - All Sizes
$32.00
LeClerc Raddles fit in the beater (2 dents per inch) Used to spread the warp when beaming. It has an open top which can be covered with top of beater. We...
LeClerc - Double Fringe Twister
Sold Out
How to use the Double Fring Twister To twist fringe, decide on the number of strands to be included, and divide them into groups. Clamp one group into each clip,...
LeClerc - Lease Stick - All Sizes
$8.50
Lease sticks are sold per stick (if you’d like a pair make sure you order two sticks) Each stick comes with a binder clip attached. Sizes available: 2010-3929: 15” Wood...
3 - in - 1 Magic Stick for Weaving
$23.00
This nifty tool functions as a beater, pick-up stick, and weaving stick, with a hole large enough to hold roving. It really is magic! Length: 10.5”
LeClerc - Stainless Steel Reed 45" (115cm)
$198.00
Stainless Steel Reed 45" (115cm) from LeClerc *Reed shown in the product photo is just an example. Measurements: 3½” inside (9cm) 4¾” (12cm) outside Available Dents: 4-25 Dents / Inch...
LeClerc - Heddle Hooks - All Sizes
$6.20
Reed and Heddle Hook: There are different size heddle hooks available. Curved steel shaft 3/16" (5mm) wire designed with ¼" (4mm) hook angle. 6141-7000: 5" (13 cm) long, made for a...
LeClerc - Triple Fringe Twister
Sold Out
How to use the Triple Fring Twister To twist fringe, decide on the number of strands to be included, and divide them into groups. Clamp one group into each clip, and...
Tapestry Beater Double-Sided
Sold Out
Double-sided tapestry beater. Made of hard maple and have a smooth Danish oil finish. The wooden teeth are set at five per inch. 6″x1.5″x.75″ 2oz
Mighty Wolf Raddle - Schacht
$202.00
Delivery 2-3 Weeks Raddles help keep a warp spread evenly as it is wound onto the warp beam. Ours have built-in clamps and can be attached to either the loom’s...
Schacht - Stainless Steel Reeds
$70.00
Schacht stainless steel reeds cover all looms: Schacht Table Loom, everything in the Wolf family, and Schacht Standard Floor Loom.Height: 4.5 in Delivery 4-6 Weeks to our studio on all out of stock reeds. Special...
LeClerc - Stainless Steel Reed 36" (90cm)
$158.00
Stainless Steel Reed 36" (90cm) from LeClerc *Reed shown in the product photo is just an example. Measurements: 3½” inside (9cm) 4¾” (12cm) outside Available Dents: 4-25 Dents / Inch...
LeClerc Threading Helper
$45.00
Used as a harness stabilizer and support for the lease sticks and raddle. It holds the cross at a convenient height during the threading. May be used in a variety...
Umbrella Swift Yarn Winder, Wooden (Birch)24"
$84.00
Erganomic Design: Knitting Umbrella Swift is designed so it is easy to set up and allows you to have both hands free to wind the yarn into a ball. Easy...
LeClerc - Stainless Steel Reed 27" (70cm)
$120.00
Stainless Steel Reed 27" (70cm) from LeClerc *Reed shown in the product photo is just an example. Measurements: 3½” inside (9cm) 4¾” (12cm) outside Available Dents: 4-25 Dents / Inch...