System Texsolv is a well-tested solution and is used all over the world. many of the world's loom manufacturer has Texsolv System as standard parts in their looms. Here are...
How to use the Double Fring Twister To twist fringe, decide on the number of strands to be included, and divide them into groups. Clamp one group into each clip,...
These warping boards are sturdily constructed and can be taken apart for easy storage. They can be used flat on a table, or hung on a wall. We have three...
Heddles are special order and take 3-4 Weeks to Ship. Heddles are non-refundable. Please double-check what size your loom needs before ordering. Leclerc always believes that light wood frame, heddle supports, and...
LeClerc Raddles fit in the beater (2 dents per inch) Used to spread the warp when beaming. It has an open top which can be covered with top of beater. We...
How to use the Triple Fring Twister To twist fringe, decide on the number of strands to be included, and divide them into groups. Clamp one group into each clip, and...
Stainless Steel Reed 45" (115cm) from LeClerc *Reed shown in the product photo is just an example. Measurements: 3½” inside (9cm) 4¾” (12cm) outside Available Dents: 4-25 Dents / Inch...
"Traditional" Boat ShuttleTo commemorate the 125th Anniversary of Leclerc Looms, we have re-introduced the Traditional Shuttle which is reminiscent of those produced by the company during its first century of...
Lease sticks are sold per stick (if you’d like a pair make sure you order two sticks) Each stick comes with a binder clip attached. Sizes available: 2010-3929: 15” Wood...
Reed and Heddle Hook: There are different size heddle hooks available. Curved steel shaft 3/16" (5mm) wire designed with ¼" (4mm) hook angle. 6141-7000: 5" (13 cm) long, made for a...
Used as a harness stabilizer and support for the lease sticks and raddle. It holds the cross at a convenient height during the threading. May be used in a variety...
A light but strong hand bobbin winder with completely covered gear. Tapered plated shaft for all Leclerc bobbins and Leclerc Spools. Clamps to a tabletop up to 1½" thick. Set...
Stainless Steel Reed 27" (70cm) from LeClerc *Reed shown in the product photo is just an example. Measurements: 3½” inside (9cm) 4¾” (12cm) outside Available Dents: 4-25 Dents / Inch...
How to use the Quadruple Fring Twister To twist fringe, decide on the number of strands to be included, and divide them into groups. Clamp one group into each clip, and...
Stainless Steel Reed 15¾" (40cm) *Reed shown in the product photo is just an example. Measurements: 3½” inside (9cm) 4¾” (12cm) outside Available Dents: 4-25 Dents / Inch Delivery 2-3...
Cranks for LeClerc Looms For Bergere, Penelope, Dorothy and Voyageur 3000-5801 For Compact and Artisat Loom 3000-5892 For Mira, Fanny, Nilus, Nilus II, Kebec, Colonial, Nilart and Weavebird looms 3000-5862 ...
Stainless Steel Reed 36" (90cm) from LeClerc *Reed shown in the product photo is just an example. Measurements: 3½” inside (9cm) 4¾” (12cm) outside Available Dents: 4-25 Dents / Inch...
Stainless Steel Reed 32'' (82cm) from LeClerc *Reed shown in the product photo is just an example. Measurements: 3½” inside (9cm) 4¾” (12cm) outside Available Dents: 4-25 Dents / Inch...
Mills are the fastest way of making chained warps with a variation of threads and colors. The cross-sections that hold the pegs may be adjusted up or down, depending on the...
A small table loom for introducing hand-weaving. This loom can make beautiful material with matched colours and assorted yarns in the weft. It weaves plain weave fabrics. With a pick-up...
Stainless Steel Reed 9½" (24cm) from LeClerc *Reed shown in the product photo is just an example. Measurements: 3½” inside (9cm) 4¾” (12cm) outside Available Dents: 4-25 Dents / Inch...